2003 Cadillac Escalade Housing Assembly HVAC Service and Repair
download TOOLS REQUIRED J 43181 Quick Connect Connector Removal Tool REMOVAL PROCEDURE 1. Drain the engine coolant. 2. Using the J 43181 disconnect the inlet heater hose from the heater core. 2.1....
View Article1992 Ford Truck E 150 Van Heater Assembly
download There are four carriage bolts which pass through holes in the instrument panel, located around the edges of a large cutout in the panel. This cutout is and opening between the heater blower...
View Article2006-2008 Chevrolet Avalanche No Movement When Transmission is Shifted to...
download Models: 1982-2005 GM Passenger Cars and Light Duty Trucks 2006-2007 Buick Rainier 2006 Cadillac Escalade, Escalade ESV, Escalade EXT 2006 Chevrolet SSR 2006-2008 Chevrolet Avalanche, Colorado,...
View Article2003 Chrysler PT Cruiser Heater Core Replacement – LHD
download HEATER CORE – LHD WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS. FAILURE TO TAKE THE PROPER PRE-CAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY. DO NOT OPEN...
View Article1991 Chevy G 20 Van Heater Core: Service and Repair Primary (Front) Heater Core
download Remove or Disconnect (Figures 5 through 10 and Figure 20) 1. Battery ground cable. 2. Coolant recovery tank. 3. Heater core hoses (140 and 141) (figures 6, 7, 8 and 20). ^ Place a clean pan...
View Article1998 Dodge Dakota R/T Heater – A/C Housing Removal and Installation
download The heater-A/C housing assembly must be removed from the vehicle and disassembled for service access of the blower motor, blower motor wheel, heater core, evaporator coil, blend-air door, and...
View Article2000 Jeep Grand Cherokee Heater Core: Service and Repair
download REMOVAL 1. Remove the heater-A/C housing from the vehicle. See: Housing Assembly HVAC/Service and Repair 2. Remove the foam gasket surrounding the core tubes. NOTE: Notice the orientation of...
View Article2002 Chevrolet Impala A/C-HEATER SYSTEMS Removal
download 1. Remove the following component: For a 3.4L engine, remove the air cleaner assembly. For a 3.8L engine, remove the fuel injector sight shield. 2. Drain the coolant. Use Hose Clamp Pliers in...
View Article1996 Lincoln Town Car Heater Core Removal
download 1. Remove the heater air plenum chamber (18471) assembly as outlined. 2. Remove the four retaining screws from the heater core cover (18B300) and remove the heater core cover from the heater...
View Article2003 Pontiac Grand Prix Heater Core Replacement
download Tools Required J 38185 Hose Clamp Pliers Removal Procedure 1. Remove the fuel injector sight shield (3.8L only). Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical-3.8L. 2....
View Article
